Circle truss, 5.00 m diameter. HD-34, cut 30, finished black.
Note. FINISH: BLACK. All truss in this rig - the 5.00 m circle, the six towers and the overhead LX bars - must be black. Natural aluminium, chrome, silver or grey truss is not acceptable.
Per-point loads are calculated from the gear actually supplied, not from this document. Fixture weights are on the KEY LIST and the weight of the lights at each position on LX WHEIGHT - 265 kg LX TOP, 250 kg LX BACK, 260 kg FRONT, 114 kg on the circle. Truss, motors, cabling and hardware vary between suppliers and are added by whoever provides them.
Fourteen flown points - three each on the LX TOP, LX BACK and FRONT overhead positions, three on the circle truss, and two on the LED screen. The six lighting towers are ground supported on their own bases and need no points.
The round truss is HD-34. For the six towers and the overhead LX bars any series is acceptable, provided the sections match the lengths on RIG-011 and everything is black.
The entire truss must be black - every element, without exception. Natural aluminium, chrome, silver or grey truss is not acceptable.
Note. FINISH: BLACK. All truss in this rig - the 5.00 m circle, the six towers and the overhead LX bars - must be black. Natural aluminium, chrome, silver or grey truss is not acceptable.
2 m pipe x6, 4 m x2, 3.5 m x2, 3 m x2, 1.5 m x6, 60 degree corner x6, truss floor base x6, and the 5 m circle. Every section black. Any manufacturer, provided these dimensions are met.
LX TOP 265 kg, LX BACK 250 kg, FRONT 260 kg, circle truss 114 kg - 889 kg of fixtures in total. These are the weights of the lights alone. Truss, motors, cabling and any other flown element are not included and must be added before any position is assessed.
